2-Piece Automotive Clip Removal Tool Set, 1 mm Thin Pliers & Pry Tool-blue

This review is for "Car Clip Pliers, 1mm Thin Stainless Steel Push Pin Removal Tool1mm ultra-thin head reaches tight clips; 4-point support lifts push pins for controlled door panel, trim and bumper removal."----------------------------------Quality - This kit includes two pieces - the pry tool and the much more complex pliers. The plastic and metal components seem sturdy enough - however the tooling marks and plastic moldings all look a little off. This doesn't effect the quality of the tools, by any means. But visually they present as lower-quality. The grip for pry tool is a harder plastic while the pliers offer a software rubbery feel. The metal parts carry no sharp or dangerous edges, but show marks from manufacturing and are coated in oil.Functionality - These both worked pretty well to help get the new mudflaps on my car by allowing me to remove the clips that would later be used for installation pretty handily. I had no issues figuring out how to use these (as a layman) and they did the job I expected, with no visible damage to the plastic clips or the car itself.Value - These are priced well as you might expect for a mid-range tool set. I see either of these selling for more than half the cost of the set, so bundling them together offers a greater value. More importantly, this did the job perfectly and made my life that much easier, so they are a good product in my opinion.

I actually ordered these for light furniture recovering projects rather than working on a car. Those little fasteners and clips show up in plenty of places besides automotive panels, and I've done enough prying at things with whatever tool happens to be nearby. 😂I haven't used the rivet remover yet, but the fastener remover works great. The thin end slips underneath a staple or a pin without needing much room, then the pliers give me enough leverage to pull it out without fighting with it or digging into the material around it.I can’t wait to try the spring-loaded handle on the rivet removal tool. I expect it to come in handy when you're removing a whole row of rivets from something…I just haven’t had a project to use that one on yet.So I can't tell you how well these work for dismantling a car, but for my little recovering projects, one of them has already earned a place in my toolbox.And more importantly, MY toolbox. My husband has his own disorganized collection to lose things in. 😂

Prying plastic push pins out of auto body panels with a standard flathead screwdriver almost always leads to gouged plastic or snapped clip heads. Having a dedicated pair of ultra-thin clip pliers completely changes that routine. The ultra-narrow tips slide cleanly under flush-mounted fasteners without scraping painted surfaces or damaging plastic liner edges, popping stubborn pins out in a single smooth squeeze.These tool steel jaws wedge under the center head effortlessly, leveraging equal pressure around the shoulder so the plastic fastener pops free intact. While pulling back the inner fender liners on a midsize truck to reach the back of the fog light housings, these pliers grabbed dirt-caked push rivets that would have shredded under standard pry tools. The companion levered pry bar handles broader interior trim panels just as well, giving you solid leverage on hidden door clips without flexing or bending under load.The coated handles provide decent grip even when working with oily hands, and the spring-loaded pivot keeps the jaws open so you can quickly jump from clip to clip. It works across various vehicle makes and aftermarket trim clips without a hitch. For a small addition to a specialty tool drawer, it saves an incredible amount of frustration and keeps you from constantly buying replacement clip kits.

The media could not be loaded.

Both tools seem well made, are comfortable to handle, and effective for their respective purposes. They quickly pry and extract your vehicle clip pins without damage so you can safely re-use them.I tried both tools out on a few of my car’s door trim and engine clips to confirm they perform great. Although I already own a few other vehicle trim clip removal tools, nothing has this offset plier head’s teeth style that I really like because it functions so well. Meaning they make a nice addition to my toolbox for car maintenance tasks.The $19.99 price I ordered them for runs a little higher than similar tools, so it's good to see that $15 coupon for a better value deal. MyRainer’s 2-piece clip remover set is one of those pieces of kit you don't need to use often, but is super handy for when you do. Overall, I'm happy with these tools.

Build QualityI've used these pliers on a few interior trim parts for my car, and they feel very well made. The stainless steel construction has a solid feel, and the tool feels durable enough for repeated use. I can see them being in my repertoire for a very long time.Ease of UseThe pliers are simple to use, even in tighter spaces. The handles provide a comfortable grip, and the design gives good leverage without requiring much effort to remove clips.PrecisionThe 1mm ultra-thin tips make a noticeable difference when working around tight trim clips. I was able to get underneath fasteners that were difficult to reach with other trim removal tools, making the job much easier.PerformanceThe four-point support design helps lift push pins evenly, reducing the chance of damaging clips or surrounding trim. I found it especially useful for removing door panel and bumper fasteners in a more controlled way.DurabilityAfter using the tool on several plastic clips, it still looks and performs like new. The tips have maintained their shape, and the hinge continues to operate smoothly.Value for MoneyFor anyone who does their own vehicle maintenance or interior repairs, I think this tool offers good value. It performs a specific job very well and has already saved me time compared to using improvised tools.Overall, I've been very pleased with these car clip pliers. They're easy to use, well built, and make removing trim clips much quicker while helping reduce the risk of damaging panels or fasteners.

Vehicle pull clips tool makes life easier. We got this, so we wouldn't keep breaking the push clips with using a screwdriver. Both of these tools worked amazing, and we didn't break any clips. Each tool works flawlessly with no learning curve. Each one worked in its own way. The screwdriver type was great for dashboard and brake light removal of the clips and the plyer type hand tool was amazing in the wheel well.The tools show quality workmanship and long lasting in the way they have been designed and built. Fast shipping was another added bonus.5 🌟🌟🌟🌟🌟

It is extremely useful, and the user experience is incredibly easy.

Great tool

Appears to be good quality it does work for what I need it for and looks like it will work with most styles of inserts

This tool works great! It easily removes Ford Transit cargo panel clips and doesn't damage the plastic clips.

Perfect tool to have

This tool does exactly what it's meant to do. The thin stainless steel head slides behind door panels and trim without much effort, and the design gives good leverage to lift push pins and clips without cracking them. It feels solid in hand, not flimsy like some cheaper trim tools I've tried. If you're doing interior panel work or removing clips on a car, this makes the job noticeably easier and cuts down on the risk of damaging the trim around it.

worked better than I expected. The 1mm ultra-thin tip makes it much easier to get under tight plastic clips where thicker tools just won't fit.The stainless steel construction feels solid, and it doesn't feel flimsy while using it. It made removing automotive clips much easier without needing to force the tool.For the price, it's an excellent value. It does exactly what it's designed to do, feels well made, and has already earned a spot in my toolbox. I'd definitely recommend it if you work on cars or remove trim panels regularly.

These car clip pliers make removing plastic push pins and trim clips much easier. The ultra-thin 1mm tip slides into tight spaces where regular tools won't fit, and the 4-point support helps lift clips evenly to reduce the chance of breaking them. They're comfortable to use, sturdy, and work well for door panels, bumpers, and other interior trim. A great addition to any DIY mechanic's toolbox.

​These pliers make removing trim clips effortless. The 1mm thin head slides easily into tight gaps, and the 4 point support lifts push pins cleanly without breaking the plastic heads or scratching your panels. Heavy duty stainless steel construction with zero flex.

Nice quality, made panel replacement a breeze, no more digging around with a flathead

Working on car interiors and body panels always means dealing with fragile plastic fasteners, and this removal tool makes the process so much smoother. The ultra thin head slides perfectly under tightly seated clips without scratching the surrounding trim, which is a huge upgrade over trying to force a flathead screwdriver into narrow gaps. I appreciate the sturdy stainless steel construction, as it feels completely solid in hand and resists bending even when pulling out stubborn, older fasteners. The clever four point support design applies even pressure around the clip, easily lifting the center pin straight up without snapping the brittle plastic wings underneath. It fits comfortably in the palm and provides enough leverage to handle difficult spots around bumpers and wheel wells without exhausting my hands.The durability and precision of these pliers provide excellent value for money for anyone who regularly tinkers with vehicles. Their compact size allows them to reach awkward angles inside door panels where standard pry tools just will not fit. Since getting this tool, the frustration of broken clips and delayed projects has basically disappeared, and the quality of the finish suggests it will last a very long time in my toolbox. It handles a wide variety of fastener styles with ease, making it highly versatile for both interior modifications and engine bay maintenance. I am thoroughly impressed with how well it performs and consider it an essential addition to any garage.

Used these on my car door panel clips. Angled jaw fit right under the trim. No scratched plastic.

After removing 30 trim clips in a row, my hand wasn’t tired. Lever action really helps.