Pneumatic 2L Vacuum Brake Bleeder Fluid Extractor Pump Kit
One-person air-powered brake bleeding kit with 2L waste fluid tank, 1L refill bottle, 60" hoses, and 16 adapters.
Pneumatic 2L Vacuum Brake Bleeder Fluid Extractor Pump Kit
SKU:BOS18-1
Couldn't load pickup availability
✅ Bleed brakes by yourself
✅ Helps reduce spills & mess
✅ Keeps master cylinder refilled
✅ 16 adapters for more fitment
✅ Long 60" silicone hoses
✅ For cars, trucks, ATVs & motorcycles
One-Person Brake Bleeding Made Easier
Package List
- 2L Brake Bleeder with USA&European Standard Connector
- 1L Refilling Bottle with Swivel Clamp and Switch Valve
- 16Pcs Bleed Screw Adapters (For Different Brake Systems)
- 60 Inch (152CM) Long Silicon Hose with a Universal Rubber Adapter
- 60 Inch (152CM) Long Silicone Hose with an Extension Corrosion- Resistant Tube
Tips
1. While you bleed the brakes, be sure to prevent the likelihood of air entering the system by keeping the reservoir full of fluid.
2. The fluid level in the brake oil pot should not exceed the oil outlet of the oil filling tank. Turn on the oil filling tank switch.
3. Remove the dust cap on the bleeder screw, putting the universal rubber adapter on the brake screw to connect the bleeder kit with the caliper. Then release the screw with a wrench.
4. When the old brake fluid is exhausted, the oil drain screw must be tightened before removing the rubber pipe from the brake screw. Do not remove the rubber pipe without tightening the oil drain screw, so that the air will enter the brake cylinder.
5. Brake fluid is highly corrosive. You must be sure to contain it as much as possible and never let it come in contact with your paint or skin.
