1L Manual Fluid Transfer Pump with 1 m Hose

1L Manual Fluid Transfer Pump for Controlled Filling

Transfer engine oil, transmission fluid, brake fluid, and other moderately viscous, non-flammable, non-corrosive liquids with this 1L manual pump. Its piston-spring action, 1 m / 39.3 in discharge hose, and flexible spout help direct fluid into filling points with more control. This pump is for dispensing fluid only; it is not designed for liquid extraction.

Designed for Clean, Controlled Transfer

The manual piston-spring mechanism uses a down-stroke action to move fluid. An ergonomic handle and flexible spout support more precise dispensing, while the nozzle holder returns excess fluid to the container.

Compatible Fluids and Important Limit

Use this pump to dispense engine oil, transmission fluid, brake fluid, and other moderately viscous, non-flammable, non-corrosive liquids. Confirm the required fluid and service procedure for your vehicle or equipment before use. Do not use this product to extract or evacuate liquid.

Reach Tight Filling Points

The 1 m / 39.3 in discharge hose provides flexibility around tools, equipment, machinery, and vehicle filling points. The hook-shaped tube end can hang on the inlet while dispensing and return to the lid storage hole after use.

Specifications

• Capacity: 1.05 qt / 1 L
• Discharge hose length: 39.3 in / 100 cm
• Maximum liquid temperature: 140°F / 60°C
• Body material: PE
• Operation: Manual piston-spring transfer pump

Use Notes

• Use only for dispensing compatible liquids; this is not an extraction pump.
• Keep the liquid temperature at or below 140°F / 60°C.
• Follow your vehicle or equipment manufacturer's fluid specification and service procedure.